Newmarket Roofers replaces, repairs, and installs uPVC fascias, soffits, and guttering for homeowners in Fordham, working from scaffold or tower for a safe, lasting finish.
Call any time. Calls are answered day and night and passed straight to our roofers.
Most homeowners think of these as cosmetic trimwork around the edge of the roof. They are not. The fascia board carries the full weight of your bottom row of roof tiles and supports the guttering. The soffit seals the gap between the fascia and the wall, keeping birds, bats, and moisture out of the roof void. The guttering channels rainwater away from your walls and foundations. When any part of this system fails, water finds its way in, and the repair bill grows quickly.
Rotten fascias are one of the most common reasons timber roof structures deteriorate ahead of their time. Water soaks into a cracked or unpainted board, spreads into the rafter feet, and by the time you notice the problem from the ground, the damage can already extend several feet into the roof structure. Catching it early saves real money.
We replace like-for-like or upgrade to uPVC fascias, soffits, and guttering on homes in Fordham and the surrounding area. uPVC does not rot, does not need painting, and will not split in frost or warp in summer heat. Where existing timber is sound, we can sometimes cap it - fitting a uPVC cover board over the top - though where rot has taken hold, full removal and replacement is the right call.
Before any board goes up, we check the rafter feet and wall plate for moisture damage. If we find rot, we will tell you clearly what it involves and what it will cost to put right before we proceed. All work is carried out from scaffold or a tower - never from a ladder alone - so every joint is fitted properly and at the correct fall.
Guttering work includes full replacements, re-jointing leaking sections, re-aligning sagging runs, fitting new downpipes, and clearing blockages where access requires scaffold anyway. We use half-round, ogee, and square-profile systems depending on what suits the property and what the customer prefers.
For a standard semi-detached house, uPVC fascia, soffit, and guttering replacement typically costs in the range of £1,500 to £3,000, depending on the size of the property, the profile chosen, and the condition of the underlying timber. Detached properties with more run length and complexity can sit higher. These are honest UK industry figures - not a quote for your job, which will depend on what we find on the day.
There is no government grant for fascia, soffit, or gutter work. The 0% VAT relief available on roof and loft insulation (currently in place until 31 March 2027) does not apply to this type of work. If a surveyor or installer tells you otherwise, ask to see the relevant HMRC guidance before agreeing to anything.
This is the section most roofing pages leave out, and it is where homeowners can genuinely save themselves money. New uPVC fascias and soffits need very little, but guttering is a different matter. If you do one thing after a new installation, keep the gutters clear.
Blocked gutters are the single most preventable cause of repeat roofline damage. Leaves, moss washed off the roof, and general debris build up in every gutter in the country, usually over autumn and winter. A full gutter holds water, which adds weight, pulls joints apart, and overflows back behind the fascia board - exactly the thing the installation was meant to prevent. Clear your gutters at least once a year, ideally after the leaves have finished falling. If your property sits near trees, twice a year is more realistic.
You can clear ground-floor guttering yourself with a ladder if you are comfortable doing so and have someone with you. For first-floor guttering and above, it is safer to use a professional with the right access equipment. Gutter vacuuming from the ground using a long-reach system is now widely available and avoids ladder risk entirely.
Walk around the outside of your house after heavy rain and look at the gutters. Water should flow smoothly towards the downpipe outlet. If you see water spilling over the front edge, the gutter is either blocked or has dropped its fall. If water is running down the wall behind the gutter, the back edge seal or bracket fixings have failed. Both are simple fixes if caught early - left longer, they stain renders and brickwork and can cause damp internally.
After a gutter replacement, look at the joints in the first winter. uPVC expands and contracts with temperature, and occasionally a union joint will work loose if it was not clipped fully home. A small drip at a joint is a five-minute repair; ignore it and the drip becomes a flow that runs behind the fascia.
uPVC fascias do not need painting, but they do collect algae and moss in shaded or north-facing locations. A wipe-down with a soft cloth and diluted household bleach solution once every couple of years keeps them clean and prevents the surface from becoming permanently discoloured. Do not use abrasive cleaners or pressure washers at close range - the surface finish will dull.
Check the bottom edge of the soffit panels periodically. If you see a brown stain running down the face, water is getting in above - either from a blocked gutter or a failed joint at the fascia-soffit junction. That stain tells you to act before the water reaches the roof void.
Many homes have ventilated soffit panels fitted to allow airflow into the roof void. This is important: without adequate ventilation, condensation builds in the loft and can cause the very rot you were trying to prevent in the timbers. If you have existing ventilation soffit strips or circular vents, make sure they are not painted or sealed over when the boards are cleaned or redecorated. If your original soffits had no ventilation, it is worth discussing vented panels when the work is done - it is straightforward to include at that stage and much harder to retrofit later.
After a spell of strong wind, walk around and look for any section of guttering that has pulled away from the fascia or any downpipe that has come loose from its clips. A loose downpipe banging against a wall will eventually crack. Re-clipping it is a minor job. Leaving it is not.
These are not awkward questions. Any experienced roofer should be able to answer all of them without hesitation.
If your fascias are showing paint failure, your soffits have soft spots, or your gutters are pulling away or leaking at the joints, get in touch so a roofer can assess what is needed and give you a straight price.
No obligation · We'll call you to arrange a free visit
Call any time. Calls are answered day and night and passed straight to our roofers.
